Atag Combi Boiler Installation in Walsall

High Hot Water Flow Rate Solution

Our customer required a high hot water flow rate at their home, which was undergoing a large extension and renovation to what was already a large detached property in Brownhills. The completed property would have 3 bath/shower rooms and ideally would have benefited from an unvented cylinder. But due to the limited size of the incoming water mains (15mm) and a tight budget we suggested an ATAG Economiser Combination Boiler. The Atag Economiser features a built in flue gas heat recovery device (FGHR) which pre-heats the incoming cold water to the boiler with waste heat picked up from the boiler flue, this reduces the work the boiler has to do to heat the water and results in fantastic hot water flow rates and increased energy efficiency.

As part of the installation, the properties old, inefficient gas boiler and hot water cylinder was removed, together with installing new radiators to the extension, significantly increasing the size of the central heating system. The existing system was powerflushed using our Magnacleanse unit, removing a substantial amount of sludge and debris which would have impacted on the new boiler. To protect the boiler in the future and honour ATAG’s significant 10 year warranty a top quality brass system filter was also fitted.

The new 35kw ATAG boiler was installed in the garage, saving on precious space by not installing an unvented cylinder not to mention the increased associated costs.

Our client now boast an efficient hot water and heating system fit for the 21st century and made a healthy saving due our specification of the ATAG Economiser.